Glass Fiber Stitched Bonded Mat for Pultrusion

• Customization: Available
• Certification: ISO
• Technique: Stitched Mat
• Model NO.: ENC250-
• Mat Type: Combination Mat
• Fiberglass Type: E-Glass
• Stardard Width: 1000mm,1250mm,1270mm
• Transport Package: Carton/Pallet
• Specification: 46KG/ROLL
• Trademark: TIANMA
• Origin: Changhou, China
• HS Code: 70194000
• Production Capacity: 50000ton/Year

Product Description

Brief introduction 
The stitched mat is made of chopped strand which randomly dispersed and be stitched together by polyester thread.
The width is available from 120-2600mm.
Density of mat generally is 300-600g/m2.
The product is compatible with Polyester resin, vinyl ester resin, and epoxy resin. 
Stitched mat is mostly primarily in pultrusion, RTM, filament winding, compression molding and hand lay up processes.
It is widely used in pipe lining, pultrusion section, storage tanks, FRP boat, insulation panel etc.
 
Feature:
No binder,optimal mechanical performance 
Uniform thickness, good wet tensile strength retention. 
Easy workablility and low coast
Good wet out speed and high efficiency in production

Data Sheet:

 

Specification	Density(g/m2)	Chopping layer density g/m2	Width mm
ENC250	250	250	1200-2600
ENC300	300	300	1200~2600
ENC350	350	350	1200~2600
ENC400	400	400	1200-2600
ENC450	450	450	1200~2600
ENC600	600	600	1200~2600

Packing :
It is rolled with paper core of inner diameter 90mm-100mm,packed with plastic film and then carton box outside.it can be put on pallet, vertically 16 cartons /pallet,horizontally 9 or 6 cartons /pallet,the height of pallet not beyond 2 layers . 
Storage :
No special requirement, stored in dry , cold ,avoiding rain wet. Don't open packing if no use . 
The documents are for reference, the content can be adjusted regarding variety of production condition.we have right for amendment.