90 ° Fiberglass Unidirectional Fabric, Glass Fiber Fabric

• Customization: Available
• Certification: ISO
• Technique: Needle Mat
• Model NO.: ETF
• Mat Type: Combination Mat
• Fiberglass Type: E-Glass
• Width: 1270mm
• Roll Weight: 50kg
• Transport Package: Carton
• Specification: WIDTH: 1270mm
• Trademark: TIANMA
• Origin: China
• HS Code: 701939
• Production Capacity: 2000ton

Product Description

Single warp fiberglass fabric

Specifications
1.High Tensile Strength and Quick Wet out
2.Perfect designable character
3.Stability
4.Stiffnes

Single warp fiberglass fabric is made of fiberglass direct roving parallel aligned in 0°directions, then stitched by polyester yarn. Also can select to add chopped strand layer or non-woven fabric layer stitched together. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in wind energy, boat building, FRP pipes and tanks, pultrusion section industry etc, suitable for pultrusion, hand lay up, filament winding, vacuum infusion processes.stems.

Technical Specification:

Code	Weight (g/m^2)	0°Warp (g/m^2)	90°Weft (g/m^2)	Chop strands (g/m^2)	Polyester tissue (g/m^2)	Layer
EL336	336	336	-	-	-	1
EF400	400	400	-	-	-	1
EF420	420	400	-	-	-	1
EF560	560	560	-	-	-	1
EF600	600	420	180	-	-	2
EFT625	625	400	-	225	-	2
EF625/N45	670	400	-	225	45	3
EF672	672	672	-	-	-	1
EF800	800	672	128	-	-	2
EFT900	600	600	-	300	-	2

Package & Storage:
The fabrics should be stored away from heat and moisture, and in their original packaging. The best conditions are : temperatures between 15 and 35 , humidity between 35 and 65%. If the product is not stored under these specifications , it is advisable to condition it in  the workshop for at least 24 hours before use, to prevent condensation. The pallets can be stored in 2 levels(1/1).Tianma  recommends that the material be used according to FIFO(first in, first our)method. It is recommended the use of a spacer plae(10mm) between the pallets.