https://membercenter.made-in-china.com/productmanage.do?xcase=view&prodId=jXYxdEnOgRpD&queryGroupId=&queryCatCode=&pageSize=30&queryState=-1&prodUpgradeActivity=
Product Description
GEL COAT- ISO TYPE
1,Brief Introduction:
TM68 is ISO-NPG type of GEL COAT .It has excellent physical properties, workability, water resistance and weather resistance, and is especially suitable for manufacturing outdoor FRP products with higher performance requirements. Hand brush or spray molding can be used.
2, Liquid resin technical data:Gel Time: 50% cyclohexanon peroxide 4%, Accelerator E1: 4%
:
Performance |
TM68 |
Standard |
Chemical properties |
Viscosity 25ºC CP |
1600-2600/3500-5500 |
GB7193.1-1987 |
Gel Time 25ºC MIN |
8-20 |
GB7193.6-1987 |
Casting body Physical properties
|
Bending strength MPa |
125 |
GB/T2570-1995 |
Flexural modulus GPa |
3.2 |
GB/72570-1995 |
Tensile Strength MPa |
68 |
GB/T2568-1995 |
Tensile modulus GPa |
3.2 |
GB/T2568-1995 |
Elongation % |
2.6 |
GB/T2568-1995 |
Impact KJ/m2 |
10 |
GB/T2571-1995 |
Barcol |
45 |
GB3854-83 |
HDT ºC |
90 |
GB1634-1979 |
Construction technology |
Curing system |
Adding hardener, accelerator |
Construction method |
- The room temperature and raw material mold temperature should be higher than 15ºC, and the ambient humidity should be lower than 70%.
- Spraying or hand brushing, the reinforcement layer can be applied when the hand is sticky without falling off the glue layer.
|
Remark |
- Available in colorless, white and various other colors. See Tianma color card. (Color glue has been promoted)
- If there are special needs, we will agree separately
|
3. Refererce Formula
Weight portion
GEL COAT 100 pottion
Hardener
(55%MEKPO
) 2 portion
(or 50% cyclohexanon peroxide
) (4 portion
)
6,Storage And Transportation
The loading and transportation must follow the rules in chapter 5 of dangerous chemicals regulations .The products should stored under 25ºC and avoid the sunshine ,heat source and fire source. The shelf life is 6 month.
Detailed Photos
Certifications