Product Description
TM-DC191 Unsaturated Polyester Resin
DCPD TYPE RESIN
1.Brief Introduction:
TM-191D UPR is a kind of ortho Pre-accelerated thixotropic unsaturated polyester resin, add thixotropic imported silica and other additives, with vertical flow not hang, good water resistance, low shrinkage, high mechanical strength, especially suitable for auto parts
2, Liquid resin technical data(25ºC):
| Item |
Unit |
Index |
Test standard |
| Appearance |
-- |
Clear pale yellow liquid |
GB/T8237.6.1.1 |
| Viscosity |
Pa.S |
0.30~0.45 |
GB/T7193.4.1 |
| Gel time |
min |
5.0~12.0 |
GB/T7193.4.6 |
| Acid value |
mgKOH/g |
18.0~26.0 |
GB/T2895 |
| Non-volatile |
% |
62.0~68.0 |
GB/T7193.4.3 |
Remark: 25ºC gel time test: Resin 50g, Accelerator EC8:1.5g, Curing agent Butanox M-50:1.0g.
3,Resin casting matrix performance(for reference)
| Item |
Unit |
Measured value |
Test standard |
| Cast matrix |
FRP |
| Tensile strength |
MPa |
50 |
-- |
GB/T 2567-2008 |
| -- |
310 |
GB/T 1447-2005 |
| Elongation at break |
% |
2.0 |
-- |
GB/T 2567-2008 |
| Flexural Strength |
MPa |
110 |
-- |
GB/T 2567-2008 |
| -- |
330 |
GB/T 1449-2005 |
| Impact Strength |
KJ/m2 |
7.8 |
-- |
GB/T 2567-2008 |
| -- |
243 |
GB/T 1448-2005 |
| HDT |
ºC |
92 |
-- |
GB/T 1634-2004 |
| Barcol Hardness |
-- |
45 |
61 |
GB/T 3854-2005 |
Remark:
1) casting matrix should follow GB/T8237-2005. Curing system: accelerator 0.8%Co/oct 1.0 %, curing agent: Butanox M-50 1.5%.
2) Post-curing of casting matrix: room temperature*24 hours+60ºC*3 hours+110ºC*2 hours.
3) Post-curing of FRP: room temperature*24 hours+60ºC*3 hours+110ºC*2 hours.
4,Instruction for use
1) High efficiency colorless accelerator shall be avoided in use. Otherwise, it will be easy to cause poor curing of products, which leads to surface stickiness. Special FRP accelerant such as E4 shall be selected to use.
2) When the ambient temperature is high and the gel time of resin is short, do not reduce the dosage of curing agent, gel retardants should be added as needed.
3) When the humidity of construction environment or the temperature is high, it is also easy to cause the surface to become sticky. Wax liquid can be added appropriately.
5,Storage And Transportation
The loading and transportation must follow the rules in chapter 5 of dangerous chemicals regulations .The products should be stored under 25ºC and avoid the sunlight, heat source ,fire source and radiant point. The shelf life in right environment is 3 months.
6,Safety data sheet(SDS)
Before using this product, please read the SDS of this product in detail.
Detailed Photos
Packaging & Shipping
Audited Supplier 
){kind=link}
){kind=link}