TM-6 UP RESIN for SMC
1. Brief Introduction:
TM-6 UPR used in SMC, this resin have characteristic of high reaction , good thickening, It can be applied in chairs, battub, moto parts.It passed CCS approval.
2. Liquid resin technical data:
| Item |
Unit |
Index |
Test standard |
| Appearance |
-- |
Clear pale yellow liquid |
GB/T 8237.4.1.1 |
| Viscosity |
25ºC,Pa.S |
1.3~1.5 |
GB/T 7193.1 |
| Gel time |
25ºC,min |
7~12 |
GB/T 7193.6 |
| Acid value |
mgKOH/g |
16~22 |
GB/T 2895 |
| Non-volatile |
% |
64~70 |
GB/T 7193.3 |
Gel Time: 50% cyclohexanon e peroxide: 4%; Accelerator E1: 4%
:
3. Resin casting matrix performance:
| item |
unit |
index |
test standard |
| Barcol Hardness |
-- |
48 |
GB 3854-83 |
| HDT |
ºC |
110 |
GB 1634-04 |
| Bending strength |
Mpa |
95 |
GB/T 2570-95 |
| Bending modulus |
Mpa |
3350 |
GB/T 2570-95 |
| Tensile strength |
Mpa |
48 |
GB/T 2568-95 |
| Tensile modulus |
Mpa |
3400 |
GB/T 2568-95 |
| Elongaion |
% |
1.62 |
GB/T 2568-95 |
Remark
:casting matrix should follow GB8237-87
Hardness system:hardener 55%MEKPO
:2% ;
accelerator E1
:2%
Later Hardness system:60
ºC×2
hours + 80
ºC×2
hours
4. Storage And Transportation
The loading and transportation must follow the rules in chapter 5 of dangerous chemicals regulations .The products should stored under 25ºC and avoid the sunshine ,heat source and fire source. The shelf life is 6 month.
Audited Supplier 
){kind=link}